Tutorials & Tips

KIPRIM

Practical operation methods, maintenance tips, and troubleshooting advice. Check your product model’s manual for detailed parameters and instructions.

📘 User Manual Center

Find the full manual, specs, and operation guide by your product model.

Go to Manual Download Page Contact Technical Support

Laser Levels

Accurate leveling tools for decoration, hanging, and tiling. Includes calibration and care tips.

Ensure the device is stable, use a tripod or mount, avoid shocks, and perform regular calibration on a flat surface.

Strong sunlight may reduce visibility outdoors; use a light shield or laser receiver if necessary.

View Model Manual →

Laser Distance Meters

Measure length, area, and volume quickly and accurately. Perfect for indoor and engineering measurements.

Single measurement provides precise readings; continuous mode tracks changes and finds minimum/maximum values.

Common units: meters/feet. Confirm before use. Some models support history recall and Bluetooth export.

View Model Manual →

Electric Screwdrivers

Efficient tools for furniture assembly and small repairs. Includes torque, charging, and anti-slip tips.

Select torque according to screw size and material; start with a lower gear to prevent stripping screw heads.

Use the original charger; avoid over-discharge; store with half charge when unused for a long time.

View Model Manual →

DC Power Supplies

Adjustable power sources for electronics repair and testing. Includes setup, protection, and cooling advice.

Confirm wiring before enabling output; adjust voltage gradually and observe load response.

Keep vents clear and dust-free; reduce ambient temperature for longer service life.

View Model Manual →

Gas Leak Detectors

Safety devices for detecting combustible gas leaks. Includes preheating, sensitivity, and alarm interpretation.

Allow sensor preheating for stable readings; move the probe slowly near suspected leak areas.

If continuous alarms occur, turn off the gas supply, ventilate, and avoid ignition until inspected.

View Model Manual →

Moisture Meters

Measure wood, wall, and floor moisture to prevent mold and material damage.

Choose correct probe depth for each material; compare readings with reference values to judge dryness.

Clean probes after use to prevent oil or dust buildup; store in a dry, shaded area.

View Model Manual →

💡 Daily Maintenance & Tips

Avoid storing tools in high temperature, humidity, or dusty environments.
Regularly clean probes, vents, and interfaces to maintain accuracy.
Disconnect power and store in a dry place when not in use; keep batteries around 50% charge.
If the device fails to power on or behaves abnormally, check batteries and contacts before contacting support.